 |
 |
|
 |
 |
|
 |
|
|
|
NU Force |
|||
|
|
||
|
Reference
8.5 V2 Mono Block |
 |
Replacing
the discontinued Reference 8, the first NuForce mono block released
in March 2005, the Reference 8.5 fitted with the new patented V2 board and more powerfull power supply, is a real giant killer. So much so we believe its better than the original Reference 9 Special Edition.
Sharing the same circuitry as the Reference 9 V2 but a smaller SMPS (switch mode power supply). However, even with the smaller 160w @ 8 ohm power supply (Upgradable), this amp will drive most speakers with ease. If you need a little more grunt or want more headroom, then upgrade to the Reference 9 V2 or SE V2 with their 190w. Available now, for those with smaller rooms or more efficient loudspeakers the Reference 8.5 V2 matches the Reference 9 V2 in all way other than power output, a sure winner in any hi fi system. Featuring both balanced and single ended inputs, at the price point few can match in terms of audio performance offered. For those used to Stereo power amps the world of the mono block needs exploring. Total channel separation projects a stunning and accurate musical image, enveloping the listener in the beauty and sonic definition. We just love the new Ref 8.5 V2.
Technical Specification
|
|
| Mono Power Amplifier |
|
| Analogue Mono Input: | RCA and True Balanced XLR |
| Power Output/Load: | 8 ohm, 288W (peak*) 160W (RMS) 4 ohm 576W (peak*) 200W (RMS) 2 ohm 1152 (peak*) 200W (RMS) |
| Bandwith: | 100 to 20K Hz +/- 0.3 db; 20 Hz -0.9 db; 80K Hz -3 db |
| Damping Factor: | >4000 |
| Input impedance: | 47K ohm |
| Gain: | 26 db |
| Dynamic Range: | 120dB |
| THD+N: | < 0.05% from 20 Hz to 20K Hz, 8 ohm load, 10 W |
| SNR: | 100 db at 100W |
| Mains Voltage: | 84VAC to 264VAC Auto Selection |
| Binding Post: | Eichmann Cable Pod accepts both spade and 4mm banana plugs |
| Dimensions: | 1.75” x 8.5” x 14” (height does not include feet) |
| Chassis Construction: | 100% high-grade, brushed and anodized aluminum |
| Weight: | 7 lb |
| *Peak Power (20 msec hold time) Peak power provide the required instantaneous power boost. | |
Rear of Reference 8.5 Mono
Block showing inputs and outputs |
|